In Metalforge's version, rods of recall (lvl 110), even those freshly bought from shops, never work. They always give the message:
"The rod of word of recall (lvl 110) whines for a while, but nothing happens."
Jane and I both discovered this independantly. (I'm selenil, by the way)
Level 100 rods of word of recall might also be bugged, but other lower levels work fine.
rods of word of recall (lvl 110) always whine, never work
Moderator: Board moderators
-
blackrazor
- Luser
- Posts: 15
- Joined: Sat Feb 13, 2010 4:41 pm
-
Panthera Leo
- Luser
- Posts: 19
- Joined: Sun Aug 10, 2008 12:17 am
I suspect on a public server you'll need a administrators help. The problem is the rod is being created without respect to the power requirements of using 'Word of Recall'.
(The spell is being added to the rod inventory, but the 'sp' and 'maxsp' stats for the rod are left at the default. Too low to power 'Word of Recall.')
Where did you get the rod, a shop? Sounds like a problem with archetype used used by the shop. Perhaps check by the IRC (The 'crossfire' channel on Freenode) channel or bug tracker ( http://sourceforge.net/tracker/?atid=11 ... unc=browse )?
If you should get lucky enough to find one in the wild as treasure, that one should work.
(The spell is being added to the rod inventory, but the 'sp' and 'maxsp' stats for the rod are left at the default. Too low to power 'Word of Recall.')
Where did you get the rod, a shop? Sounds like a problem with archetype used used by the shop. Perhaps check by the IRC (The 'crossfire' channel on Freenode) channel or bug tracker ( http://sourceforge.net/tracker/?atid=11 ... unc=browse )?
If you should get lucky enough to find one in the wild as treasure, that one should work.